Senin, 10 Agustus 2009
di
07.15
|
Tools Needed:
1. Sony Ericsson Upgrade Service
2. A2Uploader
3. Save the following as Customize_upgrade.xml
Code:
1218-2095
Step 1:
1. Run A2Uploader and click "FileSystem Tool"
2. Hold down "2" on the phone and plug in the USB cable
3. Release the 2 button when you see some activity on the left side of the A2Uploader window
4. Browse to /tpa/preset/custom.
5. Drag and drop Customize_upgrade.xml inside the filesystem window.
6. Check the list to make sure it was uploaded
7. Click the "Shutdown FS Manager" button
8. Unplug the USB cable and turn the phone on
9. It should briefly say "Please wait". When it has finished starting up, turn the phone off.
Step 2:
1. Start SEUS
2. Click the picture of a flip phone then Continue
3. Click the picture of the TM506 then Continue
4. Hold down "2" on the phone and plug in the USB cable
5. SEUS will inform you that the "Latest software is already installed! TM506 AMERICA-BAND1-4 CDF1218-2095" (Make sure it says that, not TMO-US)
6. Click "Continue anyway"
7. SEUS will flash your phone to the Cincinnati Bell firmware
8. Unplug the USB cable when it's done, and enjoy!
1. Sony Ericsson Upgrade Service
2. A2Uploader
3. Save the following as Customize_upgrade.xml
Code:
Step 1:
1. Run A2Uploader and click "FileSystem Tool"
2. Hold down "2" on the phone and plug in the USB cable
3. Release the 2 button when you see some activity on the left side of the A2Uploader window
4. Browse to /tpa/preset/custom.
5. Drag and drop Customize_upgrade.xml inside the filesystem window.
6. Check the list to make sure it was uploaded
7. Click the "Shutdown FS Manager" button
8. Unplug the USB cable and turn the phone on
9. It should briefly say "Please wait". When it has finished starting up, turn the phone off.
Step 2:
1. Start SEUS
2. Click the picture of a flip phone then Continue
3. Click the picture of the TM506 then Continue
4. Hold down "2" on the phone and plug in the USB cable
5. SEUS will inform you that the "Latest software is already installed! TM506 AMERICA-BAND1-4 CDF1218-2095" (Make sure it says that, not TMO-US)
6. Click "Continue anyway"
7. SEUS will flash your phone to the Cincinnati Bell firmware
8. Unplug the USB cable when it's done, and enjoy!
Diposting oleh
goblin
0 komentar:
Posting Komentar